(Solved): please help meTYPES OF FUELS AND THEIR CHARACTERISTICS UNIT 3 TYPES OF FUELS AND THEIR CHARACTERISTI ...

UNIT 3 TYPES OF FUELS AND THEIR CHARACTERISTICS Structure 3 Introduction Objectives 3.2 Principles of Classification of Fuels 3.3 Solid Fuels and their Characteristics 33. Woode on their acteristics 332 Couls at the Chan 3.3.3 Manufactured Solid Feels and their Characteristics 3.4 Liquid Fuels and their Characteristics 341 Petroleum and Chance 342 Manufactured Liquid Fuels and the Christi 3.5 Gaseous Fuels and their Characteristics 33. Nel Gewalt 35.3 Manufactured Gases and the Characteristics 3.6 Summary 37 Key Words 3.8 Answers to SAO 3.1 INTRODUCTION Fuel is a substance which, when bumt. ic. on coming in contact and reacting with oxygen orait produces heat. Thus, the substances classified as fuel est necessarily contain one or several of the combustible elements carbon, hydrogen sulphur, etc. In the process of combustion, the chemical energy of fuel is converted into beat energy To utilize the energy of fuel in most usable form, it is required to transform the fuel from its one state to another, i.e. from solid to liquid or gaseous state, liquid to paseous state. or from its chemical cnergy to some other form of energy via single of many stages. In this way, the energy of fuels can be utilized more effectively and efficiently for various purposes Objectives After studying this unit, you should be able to describe the classification of fuels. explain the various types of fuels and their characteristics and know their applications in various fields 3.2 PRINCIPLES OF CLASSIFICATION OF FUELS Fucis may broadly be classified in two ways, ie. (a) according to the physical state in which they exist in nature - solid, liquid and gaseous, and (b) woording to the mode of their procurement - natural and manufactured 37 Applied Thermal Engineering None of these classifications, however, gives an idea of the qualitative or intensive value of the fuels, ie their power of developing the thermal intensity or calorimetric temperature under the normal condition of use. i.e. combustion of fuels in mixture with atmospheric air in stoichiometric proportion. We shall now proceed with the further description of the fuels. A brief description of natural and manufactured fuels is given in Table 3.1. Table 3.1: Natural and Manufactured Fuels Natural Fuels Manufactured Fuels Solid Facts Wood Tambark, Bagasse, Straw Coal Charcoal Oilshale Coke Briquettes Liquid Fuels Petroleum Oils from distillation of petroleum Coultar Shale-ou Alcohol Gascons Fuels Natural gas Ceal gas Producer as Water Hydrogen Acetylene Blast furnace gas Oila 3.3 SOLID FUELS AND THEIR CHARACTERISTICS Solid fuels are mainly classified into two categories, ie, natural fuels, such as wood, coal, etc. and manufactured fuels, such as charcoal, coke, briquettes, etc. (Table 3.1). The various advantages and disadvantages of solid fuels are given below: Advantages (a) They are easy to transport (b) They are convenient to store without any risk of spontaneous explosion, (c) Their cost of production is low. (d) They posses moderate ignition temperature. Disadvantages (a) Their ash content is high. (b) Their large proportion of heat is wasted. (c) They bum with clinker formation (d) Their combustion operation cannot be controlled easily. (e) Their cost of handling is high. 3.3.1 Woods and their Characteristics The most commonly used and easily obtainable solid fuel is wood. It is the oldest type of fuel which man had used for centuries after the discovery of the fire itself. In India, 38 Types of ach and their Characteristics wood is used in almost every village, as well as in small towns and cities. In some parts of country such as Kashmir and Mysore, wood is used for industrial purposes as well Constituents of Wood Wood is vegetable tissue of trees and bushes. It consists of mainly cellular tissue and lignin and lesser parts of fat and tar, as well as sugar. The main constituents of several kinds of wood are given in Table 32 Table 3.2: Constituents of Wood (S) Type Wood Water Sugar Fat-tar Cellular Tis Lipnin Beach wood 12.57 2.41 0:41 45.57 Birchwood 12.45 265 1.14 55.62 25.21 Fir (Boots 13.87 1.26 0.97 5590 2691 Pinewood 12.87 405 16 53.27 28.15 The constituents of cellular tissue and lignin of wood are given in Table 33. Table 3.3: Constituents of Cellular Tissue and Lignin of Wood (5) Constituents Cellulari Lignin Carbon 5438 Hydrogen 58-63 Oxygen 19.4 35.79 The cellular tissue has a definite chemical composition and thus has stable constituents, while those of lignin vary within narrow limits. Hence, the constituent elements of different kinds of wood are slightly variable. Table 3.4 gives the constituents elements of wood and the average values of constituents of wood are given in Table 35. Table 3.4: Constituents of different kinds of Wood (5) Element Pine Word Birch Wood Oak Wood ? Soos 48.45 49. H 6.04 5.95 581 4526 0. Ash 43.21 0.70 04 Table 3.5: Average Values of Constituents of Wood Constituents Cellular Time ? 50.00 ? 6.00 o 13.10 N Ash 0.60 Calorific Value Engineer A. Marjhevsker determined the calorific values of different kinds of wood with the help of the samples taken out from the same tree at different distances from centre. The calorific values are given in Table 3.6. 39 Applied Thermal Engineering Table 3.6: Calorific Values of Wood kinds of Wood Lowest Calorific Value Highest Calorific Value (cale) (cal/kg) Oak 4729 4750 Birch 4695 4831 Elm 4674 4833 Alder 4745 4839 Pine 4818 5310 Fir 4887 4775 4900 15:40 Lich Ash The ash content of wood is negligible. The ash consists of mineral water that is found in the wood itself, with an admixture of some impurities which accure during transportation, etc. The mineral matte is distributed in the tree rather irregularly. The ash consists of mainly potassium carbonate with varying degrees of calcium, magnesium and sodium carbonate, as well as minute quantities of iron oxides, alumina and silica Pure ash is white in colour Moisture A freshly felled tree anything from 40% to 60% of hygroscopic moisture depending upon the species of the tree as well as the seasons of the year. On exposure to atmospheric air, the moisture dries up and reduces to 15-20% in about 18 months. On the exposure for a longer period, no appreciable change had been observed. When wood is seasoned in water, it absorbs nearly 150% of water by weight Characteristics of Flame The nature of the flame depends on the tar content of wood. Pine and birch contain more tar and hence burn with a thick and bright flame, while aspen and alder burn with a dim transparent flane. The length of the flame also depends on the tar content Combustion Characteristics The lighter the wood, the more intensely it burns with a long flame. This is because air penetrates casily throughout the whole piece during combustion. If the wood is heavy, i.e. hard, the penetration of air is rendered difficult and a concentrated flame results with the developers of mote heat at the point of burning Ignition Temperature Wood ignites very easily. That is why it is used for lighting other fuels. The average ignition temperature of different kinds of wood is given in Table 3.7 Type of Wood Ignition Temperature (0) Pine 295 Oak 287 290 Fir 292 3.3.2 Coals and their Characteristics It is commonly adopted view that coal is a mineral substance of vegetable origin. The large deposits of coal in India are in Bengal. Bihar and Madhya Pradesh. Most of the 0 Types of Fucks and their Characteristics Indian coal is of low grade variety and coal washing to obtain low ash metallurgical coal is unavoidable. Over 30% of coal output is consumed by railways, another similar proportion is used by industry including iron and steel works. This leaves barely 40% of coal mined for use of the power supply undertakings. Analysis of Coal To ascertain the commercial value of coal certain tests regarding its burning properties are performed before it is commercially marketed. Two commonly used tests are: Proximate analysis and Ultimate analysis of coal. Calorific value of coal is defined as the quantity of heat given out by burning one unit weight of coal in a calorimeter Proximate Analysis of Coal This analysis of coal gives good indication about heating and burning properties of coal. The test gives the composition of coal in respect of moisture, volatile matter, ash and fixed carbon. The moisture test is performed by heating I gm of coal sample at 104C to 110C for 1 hour in an oven and finding the loss in weight. The volatile matter is determined by heating I gm of coal sample in a covered crucible at 950C for 7 minutes and determining loss in weight, from which the moisture content as found from moisture test is deducted. Ash content is found by completely burning the sample of coal in a muffled furnace at 700C to 750C and weighing the residue. The percentage of fixed carbon is determined by difference when moisture, volatile matter and ash have been accounted for. The results of proximate analysis of most coals indicate the following broad ranges of various constituents by weight: Moisture Volatile mer Ash 2-30 Fred Carbon 16.925 The importance of volatile matter in coal is due to the fact that it largely govers the combustion which in turn governs the design of grate and combustions space used. High volatile matter is desirable in gas making. while low volatile matter for manufacturing of metallurgical coke. The Ulrimate Analysis of Coal This analysis of coal is more precise way to find the chemical composition of coal with respect to the elements like carbon, hydrogen, oxygen nitrogen, sulphur and ash Sine the content of carbon and hydrogen that is already combined with oxygen to form carbondioxide and water is of no value for combustion, the chemical analysis of coal alone is not enough to predict the suitability of coal for purpose of heating. However, the chemical composition is very useful in combustion calculations and in finding the composition of flue gases. For most purposes the proximate analysis of coal is quite sufficient The broad range in which the constituents of coal vary by weight as determined by ultimate analysis are given below: Carbon 50-955 Hydrogen 25.55 Oxygen 2-45 0.5-75 Nitrogen Ach Sulphur 05.19 41 Applied Thermal Engineering 3.3.3 Manufactured Solid Fuels and their Characteristics The manufactured solid fuels include, charcoal, coke, briquettes, etc. They are obtained from the natural fuels, like wood, coalete. Charcoal and its Characteristics Out of the mentioned various manufactured fuels, the charcoal occupies the first place in India. In some parts of the country, for example, Mysore, huge quantities of charcoal are being used till today in blast furnaces for reducing iron ores, etc. and in many homes charcoal is used for cooking purposes. Charcoal is a produce derived from destructive distillation of wood, being left in the shape of solid residue. Charcoal burns rapidly with a clear flame producing no smoke and developing heat of about 6,050 cal/kg. Coke and its Characteristics It is obtained from destructive distillation of coal, being left in the shape of solid residue. Coke can be classified into two categories: soft coke and hard coke Soft coke is obtained as the solid residue from the destructive distillation of coal in the temperature range of 600-650°C. It contains 5 to 10% volatile matter. It burns without smoke. It is extensively used as domestic fuel. Hard coke is obtained as solid residue from the destructive distillation of coal in the temperature range of 1200-1400C. It burns with smoke and is a useful fuel for metallurgical process Briquettes and their Characteristics The term briquettes is used in respect of the dust, culm, slack and other small size waste remains of lignite, peat, coke, etc. compressed into different shapes of regular form, with or without binder. Dust and rubble result in considerable percentage during mining, transportation, etc. and the briquetting industry is, therefore, an important step towards the saving of fuel economy Good briquettes should be quite hard and as little friable as possible. They must withstand the hazards of weather, and must be suitable for storing and general handling in use. These properties are impart to briquettes by a correctly selected binder, or suitable processing such as pre-heating, pressing, etc. Amongst the binders, asphalt, pitch are most commonly used, giving fine results. The general conclusion is that 5-8% binder should be used to produce high quality briquettes. Bagasse and its Characteristics Bagasse is the residue of sugarcane, left as waste in the sugar mill after extraction of sugar juice. In weight, it is about 20% of virgin cane. By nature, it is fibrous fuel which can be compared to wood. It contains 35-45 fibre, 7-10% sucrose and other combustible, and 45-559 moisture, and possesses an average calorific value of 2200 cal/kg. On moisture-fibre basis the average composition is: C=45%, H=6%, 0, -46% and Ash = 3% Bagasse is the main fuel satisfying the needs of sugar industries and efforts are being made for decreasing the percent moisture of bagasse with the help of fluc-gas waste heat dryers. Bagasse is a quick burning fuel with good efficiency. 3.4 LIQUID FUELS AND THEIR CHARACTERISTICS The liquid fuels can be classified as follows: (a) Natural or crude oil, and (b) Artificial or manufactured oils 42 their Characteristics The advantages and disadvantages of liquid fuels can be summarized as follows: Advantages (a) They posses higher calorific value per unit mass than solid fuels. (b) They but without dust, ash, clinkers, etc. (c) Their firing is easier and also fire can be extinguished easily by stopping liquid fuel supply (d) They are easy to transport through pipes. (c) They can be stored indefinitely without any loss. ( They are clean in use and economie to handle. (®) Loss of heat in chimney is very low due to greater cleanliness. (1) They require less excess air for complete combustion 6) They require less furnace space for combustion. Disadvantages (a) The cost of liquid fuel is relatively much higher as compared to solid foel. (b) Costly special storage tanks are required for storing liquid fuels. (c) There is a greater risk of five hazards, particularly, in case of highly inflammable and volatile liquid fuels. (d) They give bad odour (e) For efficient burning of liquid fuels, specially constructed burners and spraying apparatus are required. 3.4.1 Petroleum and its Characteristics Petroleum is a basic natural fuel. It is a dark greenish brown, viscous mineral oil, found deep in earth's crust. It is mainly composed of various bydrocarbons (like straight chain paraffins, cycloparaffins or napthenes, olefins, and aromatics) together with small amount of organic compounds containing oxygen nitrogen and sulphur. The average composition of crude petroleum is: C= 79.5 60 87.1%; H = 11.5101488: S=0.1 to 3.59, N and O=0.1 to 0.54. Petroleums are graded according to the following phsio-chemical properties: (a) Specific gravity. (b) Calorific value (c) Fishpoint or ignition point, (d) Viscosity. (el Sulphur contents. (1) Moisture and sediment content and (g) Specific heat and coefficient of expansion Classification of Petroleum The chemical nature of crude petroleum varies with the part of the world in which it is found. They appear, however, to be three principal verities Paraffinic Base Type Crude Petroleum This type of petroleum is mainly composed of the saturated bydrocarbons from CH, to C H2 and a little of the napthenes and aromatics. The hydrocarbons from C. Ha to C. Hr are sometimes called waxes. 43 Applied Thermal Engineering Asphalite Base Type Crude Petroleum It contains mainly cycloparaffins or napthenes with smaller amount of perffins and aromatic hydrocarbons. Mixed Base Type Crude Petroleum It contains both paraffinic and asphaltic hydrocarbons and are generally rich in semi-solid waxes 3.4.2 Manufactured Liquid Fuels and their Characteristics Manufactured liquid fuels include Gasoline. Diesel oil, Kerosene. Heavy oil, Naptha, Lubricating oils, etc. These are obtained mostly by fractional distillation of crude petroleum or liquefaction of coal Gasoline or Petrol and its Characteristics The straight run gasoline is obtained either from distillation of crude petroleum or by synthesis. It contains some undesirable unsaturated straight chain hydrocarbons und sulphur compounds. It has boiling range of 40-120C. The unsaturated hydrocarbons get exidized and polymerized, thereby causing gum and sludge formation on storing. On the other hand, sulphur compounds lead to corrosion of internal combustion engine and at the same time they adversely affect tetraethyl lead, which is generally added to gasoline for better ignition properties. The sulphur compounds from gasoline are generally removed by treating it with an alkaline solution sodium plumbite. Olefins and colouring matter of gasoline are usually removed by percolating through Fuller's earth which abseits preferentially only the colours and olefine. It is used in air-tafts. It is also used as motor fuel, in dry-cleaning and as a solvent Some of the characteristics of an ideal gasoline are the following: (a) It must be cheap and readily available. (b) It must burn cican and produce no corrosion, etc. on combustion, (c) It should met readily with air and afford uniform manifold distribution, ie should easily vaporize. id It must be knock resistant le) It should be pre-ignite easily (it must have a high calorific value Diesel Fuel and its Characteristics The diesel fuel or gas oil is obtained between 250-320C during the fractional distillation of crude petroleum. This oil generally contains 85 C. 12 H. Its calorific value is about 11.000 kcal/kg The suitability of a diesel fuel is determined by its cetane value. Diesel fuels consist of longer hydrocarbons and have low values of ash, sediment, water and sulphalt content The main characteristics of a diesel fuel is that it should easily ignite below compression temperature. The hydrocarbon molecules in a diesel fuel should be as far as possible, the straight-chaines, with a minimum admixture of aromatic and side-chain hydrocarbon molecules It is used in diesel engines as heating oil and for cracking to get gasoline. Kerosene Oil and its Characteristics Kerosene oil is obtained between 180-250C during fractional distillation of crude petroleum. It is used as an illuminant, jet engine fuel, tractor fuel, and for 44 Types of Fools and their Characteristics preparing laboratory gas. Wath the development of jet engine, kerosene has become a material of far greater importance than it is used to be. When kerosene is used in domestic appliances, it is always vaporized before combustion By using a fair excess of air it burns with a smokeless blue flame. Heavy Oil and its Characteristics It is a fraction obtained between 320-400°C during fractional distillation of crude petroleum. This oil on refractionation gives: (a) Lubricating oils which are used as lubricants. (1) Petroleum-jelly (Vaseline) which is used as lubricants in medicines and in cosmetics (c) Greases which are used as lubricants. (d) Paraffin wax which is used in candies, boot polishes, wax paper, tarpolin cloth and for electrical insulation purposes. 3.5 GASEOUS FUELS AND THEIR CHARACTERISTICS Gascous fuels occur in nature, besides being manufactured from solid and liquid fuels The advantages and disadvantages of gascous fuels are given below: Advantages Gascous fuels due to erase and flexibility of their applications, possess the following advantages over solid or liquid fuels: (a) They can be conveyed easily through papelines to th the actual place of need, thereby eliminating manual labour in transportation (b) They can be lighted at ease. (e) They have high heat contents and hence help us in having higher temperatures (d) They can be pre-heated by the heat of hot waste gases, thereby affecting economy in heat Their combustion can readily by controlled for change in demand like oxidizing or reducing atmosphere. length flame, temperature, etc. They are clean in use. They do not require any special burnet (h) They burn without any shoot, or smoke and ashes. They are free from impurities found in solid and liquid fuel Disadvantages (a) Very large storage tanks are needed (b) They are highly inflammable, so chances of fire hazards in their use is high 3.5.1 Natural Gas and its Characteristics Natural gas is generally associated with petroleum deposits and is obtained from wells dug in the oil bearing regions. The approximate composition of natural gas is: CH. = 70.95. C.H. = 5.10%. H3 = 34.CO+00:= 224 The calorific value varies from 12,000 to 14.000 kcalm. It is an excellent domestic feel and is conveyed in pipelines over very large distances. In America, it is available to a great extent, and so is quite popular as a domestic fuel. It is now used in manufacture of chemicals by synthetic process (e) 45 Applied Thermal Engineering + It is a colourless gas and is non poisonous. Its specific gravity is usually between 0.57 to 0.7. 3.5.2 Manufactured Gases and their Characteristics Manufactured gases are obtained form solid and liquid fuels. Some of the important manufactured gascous fuels whose characteristics are discussed in the following sections are coal gas, blast furnace gas, water gas, producer gas and oil gas. Coal Gas its Characteristics Coal gas is obtained when it is carbonized or heated in absence of air at about 1300C in either coke ovens or gas-making reports. In gas making retort process coal is fed in closed silica retorts, which are then heated to about 1300 C by burning producer gas and air mixture C+0+00+29.5 kcal Coal gas is a coloutless gas having a characteristic odour. It is lighter than air and burns with a long smoky flame. Its average composition is : H = 475. CH. = 32%.CO7.C.H. = 24.C.H. - 34. N = 4*, CO2 = 1 and rest 4%. Its calorific value is about 4.900 kcal/m It is used as (a) illuminant in cities and town. (b) a fuel, and (c) in metallurgical operations for providing reducing atmosphere. Blast Furnace Gas and its Characteristics It is a by product flue gas obtained during the reduction of bon ore by coke in the blast furnace. Its calorific value is about 1.600 kcal/m'. It contains about 20-25% carbon monoxide along with CO, N, etc. About 1/3 of this gas is used for pecheating air used in blast furnace itself while the remaining 2/3" is available for use in boilers or after cleaning in gas engines. It is also used for burning in a special type of stoves (called Cowper's stove) where the furnace is preheated. This gas contains much dust and is usually cleaned before use by dust settiers, cyclones or electrolytic precipitators Water Gas and its Characteristics Water gas is essentially a mixture of combustible gases CO and He with a little fraction of non-combustible gases. It is made by passing alternatively steam and little air through a bed of red hot coal or coke maintained at about 900 to 1000°C in a rector, which consists of a steel vessel about 3 m wide and 4 m in height. It is fined inside with fire-bricks. It has a cup and cone feeder at the top and an opening at the top for the exit of water gas. At the base, it is provided with intet pipes for passing air and steam. Reactions Supplied steam reacts with red hot coke (or coal) at 900-1000C to form Co and I JH C +H:0 C0+Hz - 29 kcal C+0:00, 97 kcal Composition The average composition of water gas is : H: = 51% CO = 415: N = 4%; CO = 4%. Its calorific value is about 2,800 kcal/m Uses It is used as (a) a source of hydrogen gas. (b) an illuminating gas, and (c) a fuel gas. 46 Types of Foks and hele Characteristics Producer Gas and its Characteristics Producer gas is essentially a mixture of combustible gases carbon monoxide and hydrogen associated with non-combustible gases N. CO. etc. It is prepared by passing air mixed with little steam (about 0.35 kg/kg of coal) over a red hot color coke hed maintained at about 1100'C in a special reactor called gas producer. I consists of a steel vessel about 3 m in diameter and 4 m in height. The vessel is lined inside with fire bricks. It is provided with a cup and conc feeder at the top and a side opening for the exit of producer gas. At the base it has an inlet for passing air and steam. The producer at the base is also provided with an cuit for the ash formed Rractions The gas production reactions can be divided into four zones as follows: Ash Zone The lowest zone consists of mainly of ash, and therefore, it is known as ash zone Combustion Zone The zone next to the ash zone is known as oxidation or combustion zone. Here the carbon burns and forms CO and Co. The temperature of this one is about 1100°C. The following reactions take place C+0.00, +94 kcal C+0, +20 +295 kcal -CO Reduction Zone Here carbon dioxide and steam combines with red hot carbon and liberates free hydrogen and carbon monoxide. The reactions are: CO+C+ 200 - 94 kcal C+H,0 +0+H. + 29 kcal C+2H_000+ 2H - 19 kcal All these reduction reactions are endothermic, so the temperature in the reduction zone falls to 1000'C. Distillation Zone In this zone (400-800C) the incoming coal is heated by outgoing gases by giving sensible heat to the coal. The heat given by the gases and heat radiated from the reduction on helps to distillate the fuel thereby volatile matter of coal is added to the outgoing gas. Composition The average composition of producer gas is CO - 22.3%. H2 - 8.12%; N = 52.55%: C0, 3%. Its calorific value is about 1.300 kcal/m Uses It is cheap, clean and easily preparable gas and is used for heating open-hearth furnaces (in steel and glass manufacture), muffle furnaces. retorts (used in coke and coal gas manufacture), etc. and (iii) as a reducing agent in metallurgical operations. Oil Gas and its Characteristics Oil gas is obtained by cracking kerosene oil Oil in a thin steam is allowed to fall on a stout red hot cast iron retort, which is heated in cool fired furnace. The 47 Applied Thermal Engineering resulting gaseous mixture passes out through a bonet cover to a hydraulic main, a tank containing water. Here targets condensed. Then at the testing cap the proper cracking of oil is estimated from the colour of the gas produced. A good oil gas should have a golden colour. By proper adjusting the supply of air gas of required colour can be obtained. The gas is finally stored over water in gas holders Composition The average composition of oil gas is: CH = 25,308, H, 50-55% 00=10.12%: C0 = 34. Its calorific value is about 6,600 kcal/m? Uses It is used as laboratory sa SAQ 1 (a) What is the difference between natural and manufactured fuels? (h) What are the merits and demerits of solid fuels? (c) What are the main constituents of wood? (d) What is the difference between ultimate analysis and proximate analysis of coal? (e) Mention the uses of different types of coal. ( What are the characteristics of coke and briquette fuels? (a) Mention the composition of crude petroleum (h) Mention the uses of different types of manufactured liquid fuels. (1) Mention the origin and composition of natural gas. G) Mention the characteristics of the following gaseous fuels : Coal gas (1) Water gas, om Producer gas, and (iv) Blast fumace gas 3.6 SUMMARY Let us summarise what we have learnt in this unit. In this unit, we have discussed in detail the types of fuels and their characteristics. The fuel is a substance which when once raised to its ignition temperature continues to burn if sufficient oxygen or air is available. The main constituents of any fuel are carbon and hydrogen. These constituents are called combustibles. The calorific value of a felis amount of heat liberated by its complete combustion. For solid and liquid fuels, calorific value is expressed in kJ/kg. where as for gaseous fuels it is expressed as J/m. We have learnt various types of fuels and their characteristics 48 Types of Fuels and their Characteristics 3.7 KEY WORDS Fuel : A fuel is a substance which when once raised to its ignition temperature continues to burn if sufficient oxygen or air is available. Calorific Value of Fuel : The calorific value of a fuel is amount of heat liberated by its complete combustion. Bagasse : The residue of sugarcane is called a bagasse. 3.8 ANSWER TO SAQs Refer the preceding text for all the Answers to SAQS.