(Solved): \& PART 1: The ATmega8 microcontroller shown in Figure 1 uses an external interrupt (INTO): Figure ...

\& PART 1: The ATmega8 microcontroller shown in Figure 1 uses an external interrupt (INTO): Figure 1: Practicing External Interrupt using ATmegas $?$ Controller - In normal operation, the LED LEDO blinks indefinitely (i.e. forever) at a fixed rate of $\underline{H\mathrm{H}}$. - When an interrupt occurs (i.e. when switch swo is set), the output displayed on the LEDs (LEDI to LEDA) is incremented. Then, the program returns to normal operation as stated above. Look for comments that begin with "///student:" and complete the C program lab2_part1.c (posted on Moodle) then simulate and test the above circuit using Proteus Platform.