(Solved): Help me to give the code, schemetic digram, and output waveforms in vivado environment. a) Comple ...

Help me to give the code, schemetic digram, and output waveforms in vivado environment. a) Complete the table below for the state transition and the output sum. (4 marks) b) Write a VHDL code to implement the adder FSM, according to the table above. Explain the logic and algorithm by meaningful and explanatory comments in the code. Capture the screenshot of the source code in the Vivado software environment. (6 marks) c) Synthesize and implement the design. Capture the screenshots of the schematic diagram produced by Vivado. You may combine b) and c) in one screenshot. (2 marks) d) Write a test bench code to simulate the circuit function. In the test bench code, a clock signal shifts two 8bit unsigned numbers,

and

to the right bit by bit into the Adder FSM and shifts the output s into the sum-register. Capture the screenshot of the test bench code in the Vivado development environment. (4 marks) e) With

and

, run the simulation to obtain the sum s. Capture the screenshot of the simulation result. Compare with the result with the binary addition, and show whether the simulation result is correct.Figure 5a shows the block diagram of a serial adder. The serial adder adds two 8 bit unsigned number A and B and produces the sum in the Sum- register. The heart of the serial adder is an Adder Finite State Machine (FSM) as shown in Figure 5b. The state of the FSM is the carry-in from the previous bit position, and it is denoted by

or

. Figure 5a: Block diagram for the serial adder.