Home /
Expert Answers /
Civil Engineering /
for-the-beam-and-loading-shown-design-the-cross-section-of-the-beam-knowing-that-the-grade-of-ti-pa205
(Solved): For the beam and loading shown, design the cross section of the beam, knowing that the grade of ti ...
For the beam and loading shown, design the cross section of the beam, knowing that the grade of timber used has an allowable normal stress of \( 11 \mathrm{MPa} \). The value of \( d \) is \( \mathrm{mm} \)
Expert Answer
Calculate the maximum moment using the below formula, Mmax=2Wl93=2×25kNm×2.5m93=8.019kN?m