(Solved): Configure through Cisco Packet Tracer PROCEDURE: In this lab, we build the network shown in the l ...

Configure through Cisco Packet Tracer

PROCEDURE: In this lab, we build the network shown in the lab manual. For the point to point links we sued $$t$$ he $$/30$$ s in $$192.168.10.192/27$$ subnet. For the lan network we used a variety if subnet sizes., We named the routers left middle and right. We split the $$2^{\text{nd }}$$ possible $$/18$$ subnet into 3 pieces. For the ledt lan we applied the first $$/19$$ subnet and used the next $$/21$$ for the middle and the next $$/20$$ for the right lan. To configure CDP we used the "cdp run" command at global level and "cdp enable" on the interface. To configure LDP we used the "Ildp run" command at the global level.