(Solved): Below is schematic of retort distillation unit with the rock samples in small cylindrical core plu ...

Below is schematic of retort distillation unit with the rock samples in small cylindrical core plugs had three principal components: a heating unit, a condenser and a receiver. The first heat applied as high as 800 °F resulting in oil and water vaporization. The vaporized oil and water are then condensed in the condenser and collected in a small receiving vessel. By using high temperature is essential to ensure all the oil is completely extracted from the rock sample. Second attempt was conducted to ensure all water was vaporized until core sample destroyed with 1200 °F. all the data extracted in the table below. Time, s Cumulative oil recovery, cc 350 0 0.035 500 0.04 900 0.075 1000 0.085 1100 0.09 1200 0.10 17 1500 0.11 1700 0.11 1800 0.11 2000 0.11 2300 0.11 2400 0.11 0.11 0.11 0.11 Temperature, °F 800 800 800 800 800 800 800 800 1200 1200 1200 1200 1200 1200 1200 1200 600 2500 2750 300 Cumulative water recovery, cc 0 0 0 0.03 0.04 0.055 0.065 0.105 0.125 0.13 0.13 0.13 0.14 0.16 0.175 0.175 Compute a) Built the graph time (x-axis) against cumulative volume of oil and water (y-axis). Label the Soi, Swi and Swc on the graph. b) The core plug sample had diameter 1 cm and thickness 0.326 cm with porosity is 22%. Calculate the Swc and Soi of the core plug sample. Compute a) Built the graph time (x-axis) against cumulative volume of oil and water (y-axis). Label the Soi, Swi and Swc on the graph. b) The core plug sample had diameter 1 cm and thickness 0.326 cm with porosity is 22%. Calculate the Swc and Soi of the core plug sample. Hint Tuni Vuc ? VI voi W Heating un Ceresample B Heating unt Condenabe Coeling water drcelation -Re Airling - ol Water