4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the side of the highway was cut to 50 degrees. The joints in the rock at the site form three sets with the following orientations: The below figure shows the alignment of the highway and the orientation of the three sets in the slope. The friction angle solutionspile.com

Question

4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the side of the highway was cut to 50 degrees. The joints in the rock at the site form three sets with the following orientations: The below figure shows the alignment of the highway and the orientation of the three sets in the slope. The friction angle of the joint surfaces is 26 . (a) Draw a great circle representing the

5 0^{?}

slope face and a

2 6^{?}

friction circle. (b) Examine the most likely mode of failure, that is, a plane on the following slopes, Plot each case per sheet: - North dipping slopes. - East dipping slope. Figure: Cut slope and geological structures in the cut face.

Accepted Answer

Expert Answer to -  4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the

Answer

Solution for -  4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the

Answer

This an additional answer to -  4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the

(Solved): 4. The section of the highway made with 90 degree turn in the below figure. The stiff slope on the ...

View Expert Answer

Expert Answer

Buy This Answer $5

Place Order

We Provide Services Across The Globe